It may not go much futher thant that. My 91A1 beaters radiused the cornersOriginally Posted by OD*
fairly early one...at about the 10-12k mark and have remained pretty much the same. One has a little more peening...another a little less. Variables dictate the amount.
On the ones that really get pounded, it normally doesn't amount to much more than what was shown on the two in the pictures. In other words...Only rarely will it cause a fuctional problem, and usually only in difficulty removing the firing pin stop if the metal gets flanged. Colt Series 80s that take the hit around the plunger can present a problem though. Keep an eye on those.
Bookmarks