Welcome to M1911.ORG
The M1911 Pistols Organization Forums Site


Happy Easter
To all those who celebrate it this weekend.


Sponsors Panel
If you intend to buy something from Brownells, Cabela's, TandemKros or Tekmat, please use their banners in our sites. Whatever you buy from them, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Also, don't forget to visit our other sponsors sites, click-throughs are appreciated by our advertisers. Your help is appreciated.
If you want to become a sponsor and see your banner in the above panel, click here to contact us.

Results 1 to 3 of 3

Thread: Help explaining HP's

  1. #1
    Join Date
    13th March 2019
    Posts
    2
    Posts liked by others
    0

    Help explaining HP's

    Thanks for the add. Two questions 1. Do I have the correct safety lever and grips in my 1988. 2. Why doesn't the safety work. I have three HPs, know little about the differences in years. I have a 1967, 1968 and a 1988. The 88 has a terrible safety. You have to wiggle the hammer to get it to engage, even then it is very hard. The safety is the short stubby lever and the gun has wooden grips (no red paint on backs). I thought the late 80's came with a longer lever and black molded grips. The other two guns work flawlessly, same safety lever. I have disassembled the sear, safety lever and hammer, cleaned and lubed all and can't find any reason it hangs up. Could these parts have been replaced and not fitted properly. They all three handle and shoot great. Coming from carrying Sigs, 1911s and Glocks for many years I finally shot an HP and was hooked, so now I buy any I find in good shape. Not sure of any collectors value on any I have, I just like to shoot them. Thank ahead for any help anyone can provide!

  2. #2
    Join Date
    2nd June 2004
    Location
    Terra
    Posts
    21,276
    Posts liked by others
    342
    Have you consulted Steven Camp's web site? That's where I always go first for questions about Hi-Powers.

    https://hipowersandhandguns.com/index.html
    Hawkmoon
    On a good day, can hit the broad side of a barn ... from the inside

  3. #3
    Join Date
    13th March 2019
    Posts
    2
    Posts liked by others
    0
    Yes, I have read everything there and not found my answers. That's where I got the idea that my 1988 has a different safety and grips. Another question I forgot to ask was why some have spur hammers and some have ring hammers? My 1988 has a spur type hammer the other two have the ring type. I may swap out part from one of the others and see if the problem follows the parts or stays with the gun.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Sponsors Panel
If you intend to buy something from Brownells, please use their banners above. Whatever you buy from them, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Your help is appreciated.
If you want to become a sponsor and see your banner in the above panel, click here to contact us.

Non-gun-related supporters.
Thank you for visiting our supporters.