Have an Ed Brown Special Forces, roughly 8 to 9000 rounds through it. Sent it back to factory for cleaning, tuneup, etc over New Years. Have since put around 2 to 300 rounds through.. yesterday at range, when releasing the slide after reload (released it with hand holding slide, was not a hard release), slide jammed about 3/4 of the way back to stow.. about an inch or so of barrel sticking out... no round had been loaded, had a hard time getting magazine out, had to strike back of slide with hand to get it to go to end.. now, slide is very "tight" & feels very "gritty" as it is retracted. Removed recoi spring, reassembled.. same issue with no spring installed... Can't see anything obviously wrong.... Any suggestions?
Bookmarks