The M1911 Pistols Organization Forums Site - firing pin stop
Home
Welcome to M1911.ORG
The M1911 Pistols Organization Forums Site
Contact Us Mission Statement Forum Rules Moderator Rules Legal HelpDesk Our Guestbook Donations

Go Back   The M1911 Pistols Organization Forums Site > Gunsmithing > Gunsmithing, Troubleshooting & Refinishing
User Name
Password
Register Activate FAQ Members List Calendar Mark Forums Read

You may now order your M1911.ORG 2010 Calendar, here.

Have you checked the M1911.ORG E-zine lately? Click here to visit it.
Reviews of the latest M1911 models and much more.


Have you registered in our Gun-Politics.ORG site?

Sponsors Panel




 
This is an old thread. You can't post a reply in it. It is left here for historical reasons.Why don't you create a new thread instead?
 
Thread Tools Display Modes
  #1  
Old 19th June 2004, 02:03
had
Guest
 
User ID:
Posts: n/a 
firing pin stop

just how snug should it be? mine is pretty loose. which one should i buy? brown or wilson. is it easy to fit them? i heard you take material off the extractor side till it is snug.

had

  #2   Quote post in private message Quote post in an email
United States  Old 19th June 2004, 07:26
stumbler stumbler is offline
Old Timer
 
User ID: 214
Join Date: 1st June 2004
Location: Lower Alabama, Florida
Posts: 622 
Without firing pin or extractor, it should go in and out without the need of tools. With extractor then installed, it should do the same. It is held in place by firing pin when slide is retracted. Good luck

  #3   Quote post in private message
United States  Old 19th June 2004, 08:35
1911Tuner 1911Tuner is offline
Mentor
For Exceptional Service to M1911.ORG membership  
User ID: 216
Join Date: 1st June 2004
Location: Lexington, North Carolina...or
Posts: 10,066 
Loose Stop

Howdy had,

Most factory firing pin stops will fall out under their own weight without the
other slide parts in place. A press-fit stop is a custom thing. It eliminates the tendency of the stop to drop out of position during the cycle and tying up the gun. It usually drops and catches on the hammer as the slide returns to battery. This usually happens when the firing pin spring is tired, and the
cure is usually a fresh spring every 4 or 5 thousand rounds. At less than 2 bucks a copy, it's cheap insurance.

If you want a little extra, you can use a prick punch on the front and back
edges of your stop to kick up a burr...three per side, front and back. Use a stone to dress the burrs down until the stop will press into place with medium thumb pressure. Make sure that the firing pin will snap back through the hole freely when it's done...and that the pin will move forward freely when the hammer hits it. Put a new pencil in the barrel eraser first. Point the pistol straight up and pull the trigger. It should be shot out of the barrel by a foot or so.

Luck!

Tuner

  #4  
United States  Old 19th June 2004, 13:03
1911WB's Avatar
1911WB 1911WB is offline
Member
 
User ID: 32
Join Date: 31st May 2004
Location: Central CO
Posts: 88 
Brown FP stop

I have had good luck with the Brown FP stops. They are better than factory, but generally don't require fitting (except on Kimber with adjustable sights).
__________________
NRA Endowment member
"I used to do nothing; now I'm retired." from the movie "Trouble Bound"
  #5  
Old 20th June 2004, 01:10
had
Guest
 
User ID:
Posts: n/a 
thanks guys.

had

  #6  
United States  Old 20th June 2004, 16:20
1911WB's Avatar
1911WB 1911WB is offline
Member
 
User ID: 32
Join Date: 31st May 2004
Location: Central CO
Posts: 88 
Pencil in 1911 trick

Tuner, i hadn't thought about the old pencil in 1911 trick in years. Some of our "jokers" in the Navy used to shoot pencils out of GI 1911's, and the pencils would travel for quite a number of feet and even stick in a wall. The velocity was enough to get one's attention!
__________________
NRA Endowment member
"I used to do nothing; now I'm retired." from the movie "Trouble Bound"
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



Have you checked the M1911.ORG E-zine lately? Click here to visit it.
Reviews of the latest M1911 models and much more.

All times are GMT -4. The time now is 15:47.

Page generated in 0.09206 seconds (93.43% PHP - 6.57% MySQL) with 13 queries

Copyright © John Caradimas 1994-present
The M1911 Pistols Organization
Site hosted by Worldband Com

Powered by: vBulletin
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.