Welcome to M1911.ORG
The M1911 Pistols Organization Forums Site


John needs your help
Please read this message.


Sponsors Panel
If you intend to buy something from the companies advertising above, or near the bottom of our pages, please use their banners in our sites. Whatever you buy from them, using those banners, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Your help is appreciated.
If you want to become a sponsor and see your banner in the above panel, click here to contact us.

Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: single shot charles daly

THREAD CLOSED
This is an old thread. You can't post a reply in it. It is left here for historical reasons.Why don't you create a new thread instead?
  1. #1
    Join Date
    18th November 2011
    Posts
    8
    Posts liked by others
    0

    single shot charles daly

    I bought a charles daly pistol new in 2001. i have not had any problems until now. went to range other day and it wouldn"t cycle properly. it was jamming during reloading cycle. now slide wont even unlock when fired. any suggestions It is the model with one piece guide rod and bushing less barrel.

  2. #2
    Join Date
    17th September 2010
    Posts
    1,644
    Posts liked by others
    23
    Is the link broken?
    "Make yourselves sheep and the wolves will eat you." --Benjamin Franklin (1706-1790)

  3. #3
    Join Date
    21st September 2008
    Posts
    9,964
    Posts liked by others
    209
    Check the link and also, how long is this pistol's barrel? It doesn't sound like a full-size 5"-er.
    Too many people miss the silver lining because they're expecting gold.
    M. Setter

  4. #4
    Join Date
    18th November 2011
    Posts
    8
    Posts liked by others
    0

    Angry

    it has short barrel and the link is fine. Any other suggestions or than getting rid of it

  5. #5
    Join Date
    25th September 2006
    Location
    South of Lake Superior
    Posts
    14,085
    Posts liked by others
    127
    Quote Originally Posted by blackhawktech
    Any other suggestions. . .
    Certainly. Precisely what do you mean by this?
    . . .it wouldn"t cycle properly. it was jamming during reloading cycle.
    This may help you see the kinds of details we need to help you: https://docs.google.com/document/d/1.../edit?hl=en_US

    Regards
    When you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind. [Lord Kelvin]

  6. #6
    Join Date
    18th November 2011
    Posts
    8
    Posts liked by others
    0
    I found the problem, the guide rod is binding. Now where do i get replacement parts?

  7. #7
    Join Date
    17th September 2010
    Posts
    1,644
    Posts liked by others
    23
    How 'bout Brownells? There's a link at the top of the page.
    "Make yourselves sheep and the wolves will eat you." --Benjamin Franklin (1706-1790)

  8. #8
    Join Date
    18th November 2011
    Posts
    8
    Posts liked by others
    0
    The pistol has a four inch barrel with full length guide rod. What parts fit it officers model?

  9. #9
    Join Date
    17th September 2010
    Posts
    1,644
    Posts liked by others
    23
    Quote Originally Posted by blackhawktech
    The pistol has a four inch barrel with full length guide rod. What parts fit it officers model?
    No, the Officers Model and its clones have a 3.5 inch barrel. A lot of manufacturers are making 4 inch barrel 1911's, so the parts are out there. What is wrong with your guide rod? Do you just need a new recoil spring?
    "Make yourselves sheep and the wolves will eat you." --Benjamin Franklin (1706-1790)

  10. #10
    Join Date
    18th November 2011
    Posts
    8
    Posts liked by others
    0
    Guide is not centered in bushing has binding on right side of bushing. I assume
    the guide rod is benb

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Sponsors Panel
If you intend to buy something from Brownells, please use their banners above. Whatever you buy from them, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Your help is appreciated.
If you want to become a sponsor and see your banner in the above panel, click here to contact us.

Non-gun-related supporters.
Thank you for visiting our supporters.