Based on data found on The High Road, 1.5mm. That's about 60 thousandths, I think.Originally Posted by Hawkmoon
Regards,
Walt
John needs your help Please read this message. |
Sponsors Panel |
If you intend to buy something from the companies advertising above, or near the bottom of our pages, please use their banners in our sites. Whatever you buy from them, using those banners, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Your help is appreciated. |
If you want to become a sponsor and see your banner in the above panel, click here to contact us. |
Based on data found on The High Road, 1.5mm. That's about 60 thousandths, I think.Originally Posted by Hawkmoon
Regards,
Walt
Author, The M1911 Complete Assembly Guide,
The M1911 Complete Owner's Guide, NEW The 10/22 Complete Owner's and Assembly Guide,
The M14 and M1 Garand Complete Assembly Guides
and The AR-15 Complete Assembly and NEW Owner's Guides
Last edited by wjkuleck; 12th June 2011 at 00:42.
I think you have to use 38 Super magazines. The Tok has an OAL of 1.300
& the Super has an AOL of 1.280. Also, the Tok is slightly wider than a Super; .384 vs. 0380.
I see that every one has been giving this one some thought. That's good.
I have a Mec-Gar magazine that started out holding 4 Tok rounds. I hit it with a hammer a few times, and it would hold 5, almost 6, and still fit the mag well of my .38 Super.
I thought about cutting away part of the front of the magazine, to see if I would get enough space that way. The top and bottom could remain, to hold everything together. It would look kind of odd, and I certainly wouldn't trust it, but for a range toy it might work.
I am trying to find some way to use the surplus without adding a bunch of labor. Time is money.
I might pick up a set of Lee dies and play around with it with some shorter bullets, too.
It's a good looking barrel. I can even forgive it for being stainless steel. The barrel hood is too wide to fit in a .38 Super slide, so I hope to find time to fit it this weekend.
It did fit in a .45 slide. Seemed pretty tight. I fed 3 Tok rounds manually. All 3 seemed to feed just fine. All 3 would fall out of the chamber if the pistol was held vertical.
Looks like its going to be a fun project.
Shot mine last night for the first time. Worked very well, almost no recoil, no failures of any kind. The new ammo is much hotter than the old surplus. Where did all the cheap ammo go?
Sponsors Panel |
If you intend to buy something from Brownells, please use their banners above. Whatever you buy from them, gives us a small commission, which helps us keep these sites alive. You still pay the normal price, our commission comes from their profit, so you have nothing to lose, while we have something to gain. Your help is appreciated. |
If you want to become a sponsor and see your banner in the above panel, click here to contact us. |
Bookmarks