Colt Gold Cup 70

[ser2711]

I need a help..
I bought a Colt Gold Cup in .38spc wad cutter.
I disassembled and now I am no more able to reassemble the sear because it has a very small spring and a small peace to fit together. There is any trick
to do that? Tanks in advace...

[tenx]

Use a short piece of soft wire to put in the sear depressor and spring when placing on the sear and reassembling it. As you put in the sear pin it will push out the soft wire.

These tiny parts are hard to reassemble.

[Hunter]

This may help you.
http://forum.m1911.org/showthread.php?t=16240&highlight=Gold+sear+spring