PDA

View Full Version : Q on testing the barrel link... info needed


vhince524
25th July 2007, 07:38
I bought a replacement link for my wilson barrel... bought the Wilson #3... wouldnt let the slide rack so changed it to a #4.... I can now rack the slide.... I performed the barrel link swing test... I found out that when I push the barrel muzzle against my palm up and foreward, the slidestop is in a little bind... it doesnt swing loosely but when I flick it lightly it moves about 1/8 of an inch... is this alright?...... did I install the correct link?... BTW I havent fired the pistol sinced I installed the link... thanks for any advice

vhince

John
25th July 2007, 08:35
With the slide pressed backwards, the slide release should swing freely.