Does this look normal?

[chrisct]

I received these pictures of a Series 70 and I'm wondering if this looks normal. I've attached two copies of the same picture, one with red circles.

TIA.

http://i160.photobucket.com/albums/t192/chrisct/DSC03971.jpg
http://i160.photobucket.com/albums/t192/chrisct/DSC03971red.jpg

[TheGerk]

By the time the hammer reaches this spot on the firing pin stop the hammer is already cocked. I wouldn’t worry about it.
The important thing is the machine cut for the FP stop between the FP stop and the
dis-connector slot is ok.
You can replace the FP stop with ease if needed.
The small marking on the safety cut in the slide is nothing to worry about.

[Joni Lynn]

I don't think it looks any different than what I would expect to see.

[Sandhills Writer]

;) Looks like someone put the firing pin stop back in with a punch. Just use a stone and take off the rough spots, if there are any. The safety notch looks normal to me.