PDA

View Full Version : Distances

Broadsword
26th January 2005, 23:47
:confused: Does anybody here know what is the appropriate distance of the top-most corner of the frame feedramp to the back of the impact surface in the frame? Or possibly what the ordnance specs are? Amateur Needs help, and this is really bugging me. Just want to make a few tweaks. Many thanks in advance!!!
wichaka
27th January 2005, 00:58
top-most corner of the frame feedramp to the back of the impact surface in the frame??????????

I got the feed ramp, but what are you calling the 'impact surface'?
Broadsword
29th January 2005, 01:50
:D The "impact surface" that I am referring to is the part in the frame where the back of the lower barrel lugs hits in cycling. Thanks for any additional input.
wichaka
29th January 2005, 02:45
I don't have that measuement, but from the tip of the feedramp where it meets the horizontal plain to the center of the slide stop pin hole is .79"-.01"

Will try to find the measurement of the part just forward of the feedramp.
Broadsword
30th January 2005, 00:54
:)Thanks wichaka, any info that you can tell me will help much. Really appreciate it. Many thanks in advance.