View Full Version : Custom Para Ordnace Grips
9th December 2006, 14:01
Does anyone know of a custom grip maker who makes grips for the Para Ordnance. Looking for something for my P14's. :p :p
9th December 2006, 14:43
Check Pearce grips. http://www.pearcegrip.com/para-ord.htm
9th December 2006, 15:12
Caspian sells a nice set of wood grips for their hi capacity frames... I believe they will also fit the Para's... http://www.caspianarms.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CAL&Product_Code=R13HWT&Category_Code=R13
9th December 2006, 15:17
These will NOT fit a Para. The Para grips need to have those tabs at the rear, to cover the trigger bow. These ones do not have them.
9th December 2006, 15:42
Whatever you do, absolutey do not buy any of the grips on ebay, from a seller named barsony. I bought a set, they were awful.
10th December 2006, 09:21
Thanks guys , But I would like to find a set of Micarta or Aluminum for my Paras. Thanks for your help.
10th December 2006, 10:16
I do not think you will find Aluminum ones, unless you can convince my friend Chris Lynch @ Alumagrips to make some. I know he is involved with another project these days, so I doubt that you should hold your breath for them.
By the way, did you check GunGrips.NET, the banner is at the Sponsors Panel. They have some PO grips. Darn, how did I forget that!
11th December 2006, 06:25
Yes John I did try them. I will keep looking and if we cry enough we might get the fine folks at Alumagrips to make us some. Thanks
13th December 2006, 05:08
Have found out that Smith and Alexander makes Macarta grips for the Para's have many styles to choose from. Also got e-mail back from Alumgrips and they are in the planning stages now but it will be a while the nice lady said. Thanks Brad :)
16th December 2006, 21:39
My Springfield High Capacity (Para clone) has a micarta-like grip. Hard rubber, No nonsense black , no logo, with about 25 LPI checkering.
Available from the Springfield web site. I've read here that Para grips can be adapted to the springer high cap, I assume (no first hand knowledge) visey-versy?
Hogue makes a nice Para wrap around rubber grip(Pachmyre-esque) that they say can be cut down to panels only.
Good luck, please report back.
21st December 2006, 21:31
Im also looking for P14 grips any more website that sell para-ord grips.... i have an amscor 1911-A2 Hi-cap ... i heard Para-Ord P14 grips will fit my Armcor A2
vBulletin v3.0.13, Copyright ©2000-2013, Jelsoft Enterprises Ltd.