- Metal Strippling Punches
- Combat Commander STILL jamming (grrr!)
- Front Sight pin easing out
- Engravers - Any Recomendations?
- New Sights...
- Ejection Experiments
- general qustion on barrel lock up???
- installing 10mm barrel
- barrel rubbing on slide question
- Slide release problem
- Custom Colt Delta Elite by Piper Custom
- Barrel wearing alloy frame in Kimber Ultra CDP
- Scallop shapes edge of barrel lugs - Kimber Ultra CDP
- Is it Legal to machine Your Own Gun Parts??
- how to check for wear/buying used gun
- park finish
- Can Someone Walk Me Through...
- Norinco M1911-A1 Question
- Novak front sight removal
- New SA---with extra parts??
- Bought a new high end 1911. Need Advice.
- Tap Size
- Disassembling an ambi safety
- What part is this?
- Slide stop/Woudnt hold open
- Govt. 70 model shoots low
- Ultrasonic 1, cheap bluing 0
- where oh where
- Does a 1911 Chamber have a taper?
- What is a "go/no-go" gauge; what does it measure?
- Occasional Fails to RTB with SWC Blazer
- Hanging parts for refinishing
- Sticky safety after hammer/pin change
- Bluing Questions & "carding".
- Question about lead removal and tolerances
- breechface width?
- Anyone know any good gunsmiths in So. CA/Las Vegas area?
- staking in front site
- Making the look of grain on a slide?
- Thumb Safety won't engage in slide slot
- Repairing striped busing threads on frame..
- commander hammer with standard grip safety
- mag probs
- Gunsmithing as a career?
- Polishing a frame?
- Measuring the link.
- Firing pin stop
- Ceramic finish:
- What dovetail sights will fit?
- need help reassembling my 1911
- Hammer Follows Slide - Intermittent
- Firing Pin Dimensions?
- Best "Gun Blue" Finish?
- Hybrid AO pre KHAR - Para alloy frame see the pics!
- Blue rubs off after one day of holstering
- 1911 .40 S&W to .357 Sig - Anybody done one?
- FTFeed problem on Kimber
- install a wilson trigger?
- Parts dealers in Germany or Europe
- Mil-Spec Project Complete
- Off-Center primer strikes
- Is it normal for the brass to be eaten up?
- Trigger Job
- kimber bp 10 II failure to feed
- Ejection issues with new Colt WW1 Repro
- extended slid stop 1911
- Reasonable turnaround time on minor gunsmithing?
- Brownish blemishes on nickeled slide
- New to the 1911, Last round jams
- I have tried my hardest now I need help!
- Parkerized When to refinish?
- The Blind Squirrel and the Law of Averages (Long)
- Building my first 1911
- wilson trigger install gone BAD!
- Double, Double. Toil and Trouble
- Ohhh My: Chop A Frame Question
- ok ok I give I need a 1911 gunsmith in Dallas Ft Worth area
- Original M1911 Trigger
- Up-Date on 1991 Extractor
- Full length guide rod.
- Help Please With Grip Bushings
- "Drop-in" Trigger Recommendations
- sight removal
- Double stack mags: theory - angles, friction, dirt, direction, spring pressure...
- NC gunsmith
- Narrowing a hammer
- Help!!!!!
- Will a commander slide fit on a full size frame?
- Tuning extractors?
- Removal of the old finish ?s
- Accuracy improvement help needed
- small problem
- Polishing Question
- converting to 9mm
- half-cock question (yes, another)
- 1911 barrel won't fit in my 1911a1??
- new barrel recommendation
- Ambi Safties
- Firing pin stop
- Colt M1911 barrel lock up
- lauer parkerizing and epoxy based
- Ambi Safety Loosens
- Installing Dovetail Sights
- Colt Gun Sight Paint Kit
- colt 1911 commander question
- at my wit's end (1991A1 Commander)
- Ftf
- Slide flanging - figured it out, input wanted
- Ejection Issue
- you jinxed me Johnny
- Sear spring and trigger pull
- Bang....B,Bang!!! 3 burst malfuction question
- linkpin issues
- Building the tools to build the gun
- Ooops!
- Ramped Barrel good or not?
- CD Failure to go into battery?
- Building a parts gun question
- how do I know if the frame/slide need to be tightened
- Firing pin lock out plunger question...
- Magna-Porting versus Comps
- Slide Tightening Stop
- Slide compatability question...
- Trigger Creep
- Help please hammer won't stay
- Why?
- SA loaded assembly
- Barrel to Bushing Fit?
- questions and request for advise...
- essex frames
- Light primer strikes and blowback.
- ftf.....stumped
- anyone ever heard of boiling
- rec. books on 1911,gunsmithing/accurizing etc
- replace beaver-tail grip safety
- Sear Jig & Plunger Tube Staking Tool drawings
- Slide lug measuring fixture drawing
- Officer's mag spring tension
- Ambi safety problem...I think
- grip safety won't install
- Barrel problem? ith measurements.
- Sticky Mueschke ambi safety
- Using the right stuff
- gunsmithing
- Looking for a 1911 Gunsmith in PA
- HELP - I did a bad thing
- Barrel, Bushing and Slide Fit?
- Sharing another don't do...
- Question Regarding Thumb Guards
- Off Subject (AK47 build weekend)
- Kart ez fit barrel is in, anything to check before shooting?
- Any last advice before Parkerizing.....?
- How tight?
- Problem-round seats more when chambered!
- 1st rd. flyers & cases hitting my forehead, Cures?
- Ross Carter
- Parkarizing Touch-Up or All At Once
- Diagnosing barrel fit performance.
- Sarco Builders Kit Question
- Slide operation questions
- Bevel at the top of slide stop?
- Continuing AMT Feed Problems
- Help me decide on a new barrel
- Dehorning/meltdown
- Ejecting brass making marks on the slide?
- "Drop Ins"
- Whats this?
- hammer locked in fire position
- Rust Removal
- 1911 parts = magnets?!?
- sticking firing pin problem
- New Finish
- Cost of Gunsmithing ?
- Affordable Mil-Spec Project Gun
- Hammer drops when safety released! SCARY!
- hammer strut removal
- Mag spring tension - "hard" numbers
- is the firing pin the same w/schwartz or w/outi
- Commander update (no more FTRTB)
- bow tie
- Erasing scratches on the slide
- Flared ejection port
- Ejector Education Required. Please Help.
- SW1911 DK trigger pull.
- Grip safety install?
- O.D. Green finish?
- Ftf Or?
- Jam
- Backside of the sear?
- Spring Kits?
- Rock Island Armory Rear Sight removal
- Commander......
- Please Doctor is there a cure ??
- Stainless barrel polishing
- Argh, plz help Slide Jams Shut!
- Gun Smith Recommendation - Rear Sight Modification
- Officer model malfunction
- Gunsmith Pricing?
- Fail to go into battery, 1911 .45
- Why buy when you can build
- fitting a S&A magwell to a TRP?
- Gunsmith in Fl.
- Buying parts, material question
- Reliabilty Problem-Please Help!
- Help with new bushings
- Polishing SS feed Ramp
- Grip Safety Reccommendation
- uneven wear on
- plunger tube removal
- Most Durable Finishes?
- Caspian Long Slide Finally Finished
- Who does EB Bobtails?
- Failure to extract on new Premier ll
- Custom Springfield Compact Lightweight PX9162L
- Extractor Bite On Case-Question?
- Cutting down a slide
- Convert Kimber external to internal extractor????
- Hammer won't stay cocked
- Removed bluing - any harm leaving unfinished?
- 1911 Comp Kit?
- Gold Cup NM Series 70 questions
- Help me build a Caspian Custom 1911
- .38 Casull
- ISMI Officers Recoil Assembly
- Any suggestions on how to free up a jammed magazine?
- Inadvertant slide lock
- Loose Front Sight Dovetail
- Major Help !
- Barrel Fitting Questions
- sight pusher
- Deformed Brass?
- Plunger Tube Version 2.0
- Slide lock halfway after being fired
- Hammer falls to half cocked when releasing thumb safety
- Magnetized firing pin
- Extractor Help
- Barrel Bushing-Help!
- results from kart ez fit
- RIA trigger size
- Kimber mag release
- Need help with barrel drop
- Loaded chamber indicator
- Design basis for chambering round? (slingshot vs lever)
- Para Question
- FPS and Hammer wear, and brass marks on slide
- Slide drag last .07 inch after new barrel fitted
- Failure to E
- kimber adjustable sights
- Custom 1911 Parts Critiquing Needed
- aluminum feed ramps- polishing? recognizing hardcoat removal?